Thermoplastic Elastomer | Plastic Suppliers | Plastic raw material, GSE-48 Thermoplastic Elastomer

GSE-48 Thermoplastic Elastomer

Description: GSE-48 Thermoplastic Elastomer Modifier, developing for seamlessly blending with EVA and PE to replace the original function of synthetic rubbers in its place of formulated mixture in DCP crosslink foaming method. GSE-48 has same effect and properties as those of synthetic rubbers, where GSE-48 not only modify and improve the mixture but exceed the desired effect of synthetic rubbers to creat more value for your products.

The properties Analysis

Feature:

• 1. To meet with customers’ requirement, you should use appropriate proportion of GSE-48 TPE to be dually endureable both cold and heat.
• 2. GSE-48 gives foaming items with superb elasticity and rubber like softness touching feeling.
• 3. GSE-48 improves foaming items deformation casued by compression.
• 4. GSE-48 is ranked among the highest in rebounding ability.

Application:

Applicable to your original formula by replacing the intended place of synthetic rubbers such as IR, EPDM, BR, SBR and POE in equal volume with GSE-48. With application of GSE-48, you will not only to have better result comparing to synthetic rubber but to save cost on cutting, mastication and storage.

Certificate:

SGS certified of PAHs & 14P free (Report No. TE/2014/70099R1)

Storage:

• Keep in cool place without sunshine directly.
• Against fire and hot source.